Youngs F-Body www.youngsfbody.com - 82-02 Camaro Parts, Z28 Parts, Camaro SS Parts, Firebird Parts, Trans AM Parts, GTA Parts, Iroc Parts, Formula Parts and Firehawk Parts - SLP Headers, 1 3/4" Tuned/Long Tube 1998-02 LS-1 Camaro/Firebird

Select the year of your car:
Do you want to add an install Kit :	Yes add an install kit for $115 (add $115) No Thanks

Quantity:

SLP Headers, 1 3/4" Tuned/Long Tube 1998-02 LS-1 Camaro/Firebird

Price:	$ 899.95

Headers, 1 3/4" Tuned/Long Tube 1998-02 LS-1 Camaro/Firebird

Details:

Headers, 1 3/4" Tuned/Long Tube 1998-02 LS-1 Camaro/Firebird

SLP was the first in the industry to release tuned length long tube headers for the LS1 powered Camaro and Firebird. The length of each header tube was calculated to maximize exhaust scavenging. The headers' tuned tube lengths use exhaust pulses to create a vacuum in the collector. This vacuum pulls exhaust gases out of the cylinder making more room for a fresh air/fuel charge. The more efficient exhaust scavenging lets the engine rev faster and produce more torque and horsepower. You will see increases of up to 41 horsepower and 58 lb. Ft. of torque! Equal length headers work well but, SLP tuned tube length headers are the ultimate! SLP's new headers are built with stainless steel 1 3/4" primary tubes that flow into a stainless steel, 3" collector. The headers have quality OE flanges and are completely compatible with the stock EGR, oxygen sensor and air pump systems. To connect the headers to your complete "back to the bumper" or other SLP exhaust system, SLP has designed a unique new stainless steel 3" y-pipe to work specifically with these headers. This pipe is included with the headers. To use the y-pipe you must have our optional high flow catalytic converters (Part #31037). NOT legal for use on pollution controlled motor vehicles.

SLP LS1 Stainless Steel Tuned Length Long Tube Headers:

Give up 1/2 second reduction in 1/4 mile ET and increase trap speed by up to 5 MPH.
Offer our Performance Guarantee
Have easy, bolt-on installation
Compatible with all factory emission equipment
Improved 0-60 MPH and 1/4 mile performance
Are .055" wall thickness 409 stainless steel tubing, mandrel bent to assure free flow and long life
Polished aluminum-ceramic thermal barrier coating keeps heat in, exhaust velocity up, and underhood temperature down
Limited Lifetime Warranty

Note: Requires header installation kit